1. Used for threaded M16x0.75 electromagnetic coil. 2. MPPES for proportional pressure regulating valve 3. Cable length is 2.5-5m. 4. with PVC cable 5. Ambient temperature-30-+80 C....ReadMore

1. By operating the joystick, the flow can be finely adjusted infinitely. 2. Interchangeable nozzles 3. Working medium compressed air...ReadMore

1. Combination of filter pressure reducing valve, shut-off valve, on-off valve, soft start valve and fixed accessories. 2. specifications Mini, Midi, Maxi...ReadMore

1. Circulating ball bearing guide rail, suitable for high load and torque. 2. AG gives strength 3. Accurate and load-bearing guide rail 4. When the acceleration is as high as 50m/s2, the speed is as high as 5m/s. 5. Optional: food grade 6.4 sides can be selected, and the motor can be flexibly connected. 7. Both the guide rail and the toothed belt are protected by the covering belt. 8. There are 22 types of inventory, short delivery time, and modular products, which can be customized and derived. 9. Long stroke up to 8.5m 10. Perfect match with our comprehensive product portfolio of electromechanical actuators, motors, drive controllers and control systems....ReadMore

1. Width dimension 40mm 2. Two-position two-way valve, which is used to slowly ventilate pneumatic equipment with electrically switchable pressure switching point. 3. The power supply voltage is 24VDC,110,230VAC. 4. Switched pressure switching point 5. Used to run the drive to the initial position slowly and safely. 6. Avoid sudden and unpredictable movements 7. Settable pressure building time...ReadMore

1. Functional module, which is used to automatically convert, transport and remove small parts in a narrow space. 2. Forced motion in vertical and horizontal directions. 3. High precision and strong rigidity 4. Compact structure 5. The cycle time is extremely short 6. Optimize the cost 7. Adjustable travel in Y and Z directions....ReadMore

1. Module width is 124 mm. 2. Good separation effect of particles and condensed water. 3. When the pressure drop is small, the flow rate is high 4. Manual, semi-automatic, full-automatic or full-automatic electronically controlled condensate drainer can be selected....ReadMore

1. Maximum corrosion resistance (corrosion resistance grade 4 according to Festo940070 standard) and chemical resistance. 2. See www.festo.com/certificates/CRQS for food grade. 3. Working medium: compressed air, vacuum, (water) 4. Stainless steel 5.Straightshape,L-shape,T-shape,Y-shape,push-inbulkheadconnector...ReadMore

1. Maximum corrosion resistance (corrosion resistance grade 4 according to Festo940070 standard) and chemical resistance. 2. See www.festo.com/certificates/CRQS for food grade. 3. Working medium: compressed air, vacuum, (water) 4. Stainless steel 5.Straightshape,L-shape,T-shape,Y-shape,push-inbulkheadconnector...ReadMore

1. Maximum corrosion resistance (corrosion resistance grade 4 according to Festo940070 standard) and chemical resistance. 2. See www.festo.com/certificates/CRQS for food grade. 3. Working medium: compressed air, vacuum, (water) 4. Stainless steel 5.Straightshape,L-shape,T-shape,Y-shape,push-inbulkheadconnector...ReadMore

1. Maximum corrosion resistance (corrosion resistance grade 4 according to Festo940070 standard) and chemical resistance. 2. See www.festo.com/certificates/CRQS for food grade. 3. Working medium: compressed air, vacuum, (water) 4. Stainless steel 5.Straightshape,L-shape,T-shape,Y-shape,push-inbulkheadconnector...ReadMore

1. Maximum corrosion resistance (corrosion resistance grade 4 according to Festo940070 standard) and chemical resistance. 2. See www.festo.com/certificates/CRQS for food grade. 3. Working medium: compressed air, vacuum, (water) 4. Stainless steel 5.Straightshape,L-shape,T-shape,Y-shape,push-inbulkheadconnector...ReadMore

1. Exhaust throttle valve GRE: sintered metal 2. Silencing throttle GRU: plastic...ReadMore

1. Exhaust throttle valve GRE: sintered metal 2. Silencing throttle GRU: plastic...ReadMore

1. Module width is 124 mm. 2. Proportional oil fogger with accurate oil metering. 3. It can be filled conveniently and quickly under pressure. 4. The refueling volume is 30-1500cm3....ReadMore

1. Stop valve, manual 2. Interface: double-sided thread, double-sided quick plug connector and threaded/quick plug connector. 3. Different installation options...ReadMore

1. Cut-off-flow control valve 2. Tubular installation...ReadMore

1. Wear parts of vacuum sucker ESS 2. Easily interchangeable 3. Vacuum sucker volume: 0.318-245cm3 4. Minimum workpiece radius: 10-680mm....ReadMore

1. Two-phase mixing technology is adopted, so the increment is small and the driving torque is high. 2. Optimized connection technology 3. Four sizes, the flange size is 28, 42, 57 and 87. 4.28 storage models 5. Equipped with incremental encoder for closed-loop control operation. 6. Protection grades IP40 (motor shaft), IP54 (specifications 42, 27 and 87: motor housing and plug connection) and IP65 (specification 28: motor housing and plug connection) 7. Optional parking brake...ReadMore

1. Multiple interfaces and functions for distributed motion functions (flying saw, flight measurement, module function, ...) 2. Optional: integrated cam disk controller and high dynamic movement. 3. The standardized interface can be seamlessly integrated into the multi-axis module of mechatronics. 4. Use Festo configuration tool FCT to debug and set parameters safely and comfortably. 5. You can choose 3 slots for the expansion module. 6. Derived type with safety function 7.255 positioning records...ReadMore

1. Servo positioning controller is used as CPX module, which supports pneumatic piston rod driver, piston rod-free driver and swing driver. 2. Force and position adjustment 3. Used for all available fieldbus/Ethernet and controller CEC in CPX. 4. Simply debug through automatic identification function. 5. Fast debugging and comprehensive diagnosis through parameter setting software FCT. 6. Perfect match with our comprehensive product portfolio such as electromechanical actuator, motor, drive controller and control system....ReadMore

1. closable type 2. Good control characteristics, small pressure hysteresis and initial pressure compensation. 3. High secondary air displacement 4. The derivative type conforms to the EU explosion-proof directive (ATEX) 5. Recommend a variety of derivative production systems for lithium-ion battery manufacturing....ReadMore

1. closable type 2. Good control characteristics, small pressure hysteresis and initial pressure compensation. 3. High secondary air displacement 4. The derivative type conforms to the EU explosion-proof directive (ATEX) 5. Recommend a variety of derivative production systems for lithium-ion battery manufacturing....ReadMore

1. Two-position two-way valve for slowly ventilating pneumatic equipment (applicable to on-off valves HE and HEE). 2. Used to build up pressure steadily 3. Settable pressure building time 4. specifications Mini, Midi, Maxi...ReadMore

1. Cut-off-flow control valve 2. Tubular installation...ReadMore

1. Used to cut off the compressed air source when exhausting the pneumatic equipment at the same time. 2. It can be closed in the locked state. 3. Screw in the pipe, and the through hole/mounting hole is used for wall installation. 4. Comply with OSHA29CFR147....ReadMore

1. Axis is used to achieve high repeatability. 2. Circulating ball bearing guide rail, suitable for high load and torque. 3. Optional clamping unit, unilateral or bilateral. 4. The profile is more rigid. 5.2 sides can be selected, and the motor can be flexibly connected. 6.34 models are available in stock, and the delivery time is short. The product module is suitable for custom design. 7. The journey can be as long as 3m. 8. Perfect match with our comprehensive product portfolio of electromechanical actuators, motors, drive controllers and control systems....ReadMore

1. Module width is 124 mm. 2. Optional integrated check function and pressure switch. 3. Discharge upward and downward 4. It can be used as a branch outlet with different air quality. 5. Optional pressure sensor...ReadMore

1. Socket with cable plug for multi-pin interface 2. Pre-configuration 3. Fix it with pipe joint nut with 2 screws....ReadMore

1. Socket with cable plug for multi-pin interface 2. Pre-configuration 3. Fix it with pipe joint nut with 2 screws....ReadMore

1. Socket with cable plug for multi-pin interface 2. Pre-configuration 3. Fix it with pipe joint nut with 2 screws....ReadMore

1. Socket with cable plug for multi-pin interface 2. Pre-configuration 3. Fix it with pipe joint nut with 2 screws....ReadMore

Solenoid valve is an industrial equipment controlled by electromagnetism, and it is an automatic basic element used to control fluid. It belongs to actuators and is not limited to hydraulic and pneumatic....ReadMore

Solenoid valve is an industrial equipment controlled by electromagnetism, and it is an automatic basic element used to control fluid. It belongs to actuators and is not limited to hydraulic and pneumatic....ReadMore

Solenoid valve is an industrial equipment controlled by electromagnetism, and it is an automatic basic element used to control fluid. It belongs to actuators and is not limited to hydraulic and pneumatic....ReadMore

Filter element is a device with filtering and purifying function, which is mainly used to separate and purify impurities in fluid, and is widely used in air, water, oil and other filtering industries....ReadMore

Activated carbon filter is a commonly used water treatment equipment. As the pretreatment of water treatment desalination system, it can adsorb residual chlorine that cannot be removed in the previous stage of filtration, which can effectively ensure the service life of the latter stage equipment, improve the effluent quality and prevent pollution, especially the free residual chlorine poisoning pollution of the latter stage reverse osmosis membrane and ion exchange resin....ReadMore

Sensor interface is a standardized or non-standardized interface used to connect sensors with external devices (such as single chip microcomputer, computer, etc.), which is mainly used for data transmission and signal control....ReadMore

Sensor interface is a standardized or non-standardized interface used to connect sensors with external devices (such as single chip microcomputer, computer, etc.), which is mainly used for data transmission and signal control....ReadMore

Panel pressure gauge is a kind of mechanical instrument, which converts the force of pressure into mechanical displacement or electrical signal by measuring it....ReadMore

Luminous seal is a new sealing material widely used in mechanical seals. The material has excellent wear resistance, corrosion resistance, high temperature resistance and good sealing performance, and at the same time, it can emit soft light and has high aesthetics....ReadMore

Luminous seal is a new sealing material widely used in mechanical seals. The material has excellent wear resistance, corrosion resistance, high temperature resistance and good sealing performance, and at the same time, it can emit soft light and has high aesthetics....ReadMore

Luminous seal is a new sealing material widely used in mechanical seals. The material has excellent wear resistance, corrosion resistance, high temperature resistance and good sealing performance, and at the same time, it can emit soft light and has high aesthetics....ReadMore

Luminous seal is a new sealing material widely used in mechanical seals. The material has excellent wear resistance, corrosion resistance, high temperature resistance and good sealing performance, and at the same time, it can emit soft light and has high aesthetics....ReadMore

Luminous seal is a new sealing material widely used in mechanical seals. The material has excellent wear resistance, corrosion resistance, high temperature resistance and good sealing performance, and at the same time, it can emit soft light and has high aesthetics....ReadMore

Terminal resistance is an obstacle that electronic information encounters in the transmission process. When high-frequency signals are transmitted, the signal wavelength is shorter than that of the transmission line, and the signal will form a reflected wave at the end of the transmission line, which will interfere with the original signal, so it is necessary to add a terminal resistor at the end of the transmission line....ReadMore

1. Small magnetic switches with two sides (D-M9□ type) can be installed 2. Can be installed from the front of the magnetic switch 3. Maximum quality reduction of 14% 4. With buffering 5. Easy to adjust the buffer needle valve 6. With magnetic switch (CRA1 series: CDRA1, CDRA1□□U-Z, CDVRA1)...ReadMore

1. Small magnetic switches with two sides (D-M9□ type) can be installed 2. Can be installed from the front of the magnetic switch 3. Maximum quality reduction of 14% 4. With buffering 5. Easy to adjust the buffer needle valve 6. With magnetic switch (CRA1 series: CDRA1, CDRA1□□U-Z, CDVRA1)...ReadMore

1. Small magnetic switches with two sides (D-M9□ type) can be installed 2. Can be installed from the front of the magnetic switch 3. Maximum quality reduction of 14% 4. With buffering 5. Easy to adjust the buffer needle valve 6. With magnetic switch (CRA1 series: CDRA1, CDRA1□□U-Z, CDVRA1)...ReadMore

1. Small magnetic switches with two sides (D-M9□ type) can be installed 2. Can be installed from the front of the magnetic switch 3. Maximum quality reduction of 14% 4. With buffering 5. Easy to adjust the buffer needle valve 6. With magnetic switch (CRA1 series: CDRA1, CDRA1□□U-Z, CDVRA1)...ReadMore

1. Small magnetic switches with two sides (D-M9□ type) can be installed 2. Can be installed from the front of the magnetic switch 3. Maximum quality reduction of 14% 4. With buffering 5. Easy to adjust the buffer needle valve 6. With magnetic switch (CRA1 series: CDRA1, CDRA1□□U-Z, CDVRA1)...ReadMore

1. Small magnetic switches with two sides (D-M9□ type) can be installed 2. Can be installed from the front of the magnetic switch 3. Maximum quality reduction of 14% 4. With buffering 5. Easy to adjust the buffer needle valve 6. With magnetic switch (CRA1 series: CDRA1, CDRA1□□U-Z, CDVRA1)...ReadMore

1. Small magnetic switches with two sides (D-M9□ type) can be installed 2. Can be installed from the front of the magnetic switch 3. Maximum quality reduction of 14% 4. With buffering 5. Easy to adjust the buffer needle valve 6. With magnetic switch (CRA1 series: CDRA1, CDRA1□□U-Z, CDVRA1)...ReadMore

1. Small magnetic switches with two sides (D-M9□ type) can be installed 2. Can be installed from the front of the magnetic switch 3. Maximum quality reduction of 14% 4. With buffering 5. Easy to adjust the buffer needle valve 6. With magnetic switch (CRA1 series: CDRA1, CDRA1□□U-Z, CDVRA1)...ReadMore

1. Small magnetic switches with two sides (D-M9□ type) can be installed 2. Can be installed from the front of the magnetic switch 3. Maximum quality reduction of 14% 4. With buffering 5. Easy to adjust the buffer needle valve 6. With magnetic switch (CRA1 series: CDRA1, CDRA1□□U-Z, CDVRA1)...ReadMore

1. Small magnetic switches with two sides (D-M9□ type) can be installed 2. Can be installed from the front of the magnetic switch 3. Maximum quality reduction of 14% 4. With buffering 5. Easy to adjust the buffer needle valve 6. With magnetic switch (CRA1 series: CDRA1, CDRA1□□U-Z, CDVRA1)...ReadMore

1. Small magnetic switches with two sides (D-M9□ type) can be installed 2. Can be installed from the front of the magnetic switch 3. Maximum quality reduction of 14% 4. With buffering 5. Easy to adjust the buffer needle valve 6. With magnetic switch (CRA1 series: CDRA1, CDRA1□□U-Z, CDVRA1)...ReadMore

1. Small magnetic switches with two sides (D-M9□ type) can be installed 2. Can be installed from the front of the magnetic switch 3. Maximum quality reduction of 14% 4. With buffering 5. Easy to adjust the buffer needle valve 6. With magnetic switch (CRA1 series: CDRA1, CDRA1□□U-Z, CDVRA1)...ReadMore

1. Small magnetic switches with two sides (D-M9□ type) can be installed 2. Can be installed from the front of the magnetic switch 3. Maximum quality reduction of 14% 4. With buffering 5. Easy to adjust the buffer needle valve 6. With magnetic switch (CRA1 series: CDRA1, CDRA1□□U-Z, CDVRA1)...ReadMore

1. Small magnetic switches with two sides (D-M9□ type) can be installed 2. Can be installed from the front of the magnetic switch 3. Maximum quality reduction of 14% 4. With buffering 5. Easy to adjust the buffer needle valve 6. With magnetic switch (CRA1 series: CDRA1, CDRA1□□U-Z, CDVRA1)...ReadMore